Kangertech Nebox

The NEBOX is the latest device out of  the Kangertech Stable, This is an all-in-one device utilising both temperature control coils and functionability and regular coils with an output of 60 watts. The all-in-one design has a huge 10ml capacity tank hidden away in the mod itself which makes the NEBOX one of the most ergonomically comfortable and portable devices available on the market.

 Black, Blue, Red & White,  

Features:

• All-in-one design meaning maximum portability and comfort in the hand.
• Temperature Control - 100-300°C / 200-600°F
• 10ml capacity built in tank
• 7-60 watt output adjustable in 0.1 watt increments
• TC mode supports both Nickel and Titanium with a mode for each
• Employs use of Ni200, SSOCC, OCC and included RBA
• Pass through capable 
• Requires 1 x 18650 Flat-top battery- Min 20A discharge 

Contents:

• 1 x NEBOX
• 1 x SSOCC 0.15 ohm installed (nickel with stainless steel coating for Temp Control)
• 1 x SSOCC 0.5 ohm (newly designed stainless steel OCC)
• 1 x removable drip tip
• RBA pre-built coil x 2
• RBA Mini (juice holes on side as with Subox kit RBA)
• Japanese cotton sheet
• Authenticity code user guide
• SSOCC caution card
• User manual
• Magic Blue Screwdriver
• USB Cable
• Battery stickers

Coil ratings:

Ni200, Ti and Nichrome, 0.15-1.3Ω

Nichrome (OCC) 0.3Ω or above 

These devices will run with Subox / subtank coils 

Modes:

The NEBOX uses three different modes. M1 is for use of nickel wire such as with the Ni 200s and newly designed SSOCC 0.15ohm coils. M2 is designed for use with Titantium wire, and lastly M3 is wattage mode and will fire the coil irrespective of the temperature of the coil in the exact same way a non temperature contol variable wattage device works, such as the Kbox mini from the Subox starter kit.

In both M1 and M2 modes, the NEBOX will cut off the output once the coil reaches the pre-set temperature. The wattage setting whilst in M1 and M2 mode will simply speed up or slow down the time it takes to reach the pre-set temperature. 

Presets:

The NEBOX also makes use of 6 presets. Somewhat confusingly these presets are also labelled with the prefix "M". M1 to M4 offer four presets for use with temp control and M5 to M6 offer two presets for use in wattage mode. The general idea here is to have a high and low setting for nickel (M1 and M2), titanium (M3 and M4) and wattage mode (M5 and M6) but the user can change the value of these presets to suit whatever set up they want.